SEARCH:             DEALER LOGIN           VIEW CART    
 
COVID-19 CORONAVIRUS ALERT

ALERT: COVID-19:CORONAVIRUS
Out of an abundance of caution for the health and safety of our employees, our shipping warehouse has been closed until further notice. Items placed in your online shopping carts will be saved and can be purchased once we begin shipping products again. We at ToyotomiUSA wish you good health. Stay safe.

HC-20B Toyotomi Heat Convector With Wall Bracket

HC-20B Toyotomi Heat Convector With Wall Bracket
HC-20B Toyotomi Heat Convector With Wall Bracket HC-20B Toyotomi Heat Convector With Wall Bracket HC-20B Toyotomi Heat Convector With Wall Bracket HC-20B Toyotomi Heat Convector With Wall Bracket HC-20B Toyotomi Heat Convector With Wall Bracket


   Maximize the Benefits of Hydronic Heating and Usable Floor Space
  • Complements the highest efficiency, aquastatic controlled boilers that use low water temperatures.
  • Internal thermostat control circuitry allows unit to communicate to zone valve or boiler controller – an exclusive feature that no other convector has!
  • Easy to use LED display panel with built in thermostat that includes boiler when zone should come on or off based on homeowner’s desired comfort requirement.
  • Variable fan speed maximizes operating efficiency and fuel savings.
  • Benefit of both radiant heat and convective heat.
  • Whisper quiet fan efficiently distributes heat evenly throughout the home.
  • Heats an area of 300 to 1,000 square feet (heat output of 3,000 BTU per hour on low setting to 20,200 BTU per hour on high).
  • Saves valuable wall space, replacing up to 37 feet of baseboard. *
  • Can be installed in less than half the time of baseboard.
  • INCLUDES BRACKET FOR WALL HANGING
  • AVAILABLE ACCESSORY HC-20B: EXTENSION BRACKET (PART #10007065) allows Wall Hung Bracket to be extended out from the wall making pipe connections much easier.
  • Baseboard length calculated based on 550 BTU/ft.
Model: HC-20 HEAT CONVECTOR
Type Hot water heating, floor standing, or wall hanging (with available accessory)
Heating Range 3,000 - 20,200 BTU/H
Heating Exchanger 0.16 gal. (0.6L)
Flow Rate 1.0 gal/min. (3.785L/min)
Hot Water Temperature Range 110°F - 190°F (43°C - 87.8°C)
Operation Mode Auto FanMode - 4 fanspeeds(Hi/Med/Lo/Off)
Manual Fan Mode - 3 fanspeeds (Hi/Med/Lo)
Size (WxHxD) 28-3/8" 15-1/4" x 7-3/8" (720 x 387 x 187 mm)
Weight 27.5 lbs. (12.5 kg)
Set Temperature Range 50°F - 90°F (12°C - 30°C)
Electrical Rating 120 Volts AC, Single phase 60 Hz
High- 37  (0.4A)
Med - 16W
Low - 9W
CFM High-226 F3/min
Med - 141 F3/min
Low- 64 F3/min
Sound Pressures
at 8.2ft.(2.5m) (dBA)
High - 38,Med- 28, Low - 19
Fuse 5A
Wall Mount/Hanging Bracket Included


Tags: HC-20 Toyotomi Heat Convector
SITE CREATED BY DACTYL TECHNOLOGIES, LLC