Your shopping cart is empty!
 |
SEARCH: 
DEALER LOGIN
VIEW CART 
|
|
 |
||
OM-180 Toyotomi HYDRONIC HEATER
Brand: Toyotomi
Product Code: OM-180
Item Available for Purchase Thru Dealer Only
(Click here to locate a dealer)
Product Code: OM-180
Item Available for Purchase Thru Dealer Only
(Click here to locate a dealer)
|
OM-180 HYDRONIC HEATER
|
- Compact size and 81 lb. weight allows for one person installation
- Inlets/outlets on two sides for easy installation
- Choice of direct vent or chimney vent
- Cold start capability
- Flow rate of over 4 gallons per minute with 60°F rise in temperature
- Approximately 180°F maximum hot water temperature
- Very quiet and reliable operation
- Stainless steel heat exchanger and cabinet
- Adjustable temperature differential for cycling control
- Safe: ETL and home and mobile home approved
- Proven trouble-free performance.
- Limited 10 YEAR WARRANTY*
* EFFECTIVE 9/1/07
| Flow Rate/Temperature Rise: | 6.2 gal/min (40°F rise), 5.0 gal/min (50°F rise) 4.1 gal/min (60°F rise), 3.5 gal/min (70°F rise) 3.1 gal/min (80°F rise) |
| Ignition | High Voltage Discharge Spark |
| Efficiency | 87.1% AFUE rating |
| Fuel Consumption: | 1.05 gal/h |
| Capacity of Heat Exchanger: | 5.10 gal |
| Temperature Differential Settings: | 3.6°F, 18°F, 36°F (3 settings by selector switch) |
| Fuel System: | External tank |
| Dimensions (W x H x D): | 12-5/8" x 27-3/4" x 22-1/2" |
| Weight: | 81 lbs. Empty |
| Vent Pipe Hole: | 4-3/4" diameter (for flue pipe installation kit) |
| Maximum Length of Vent Pipe System: | 10 ft., 3 bends or less (exhaust pipes for flue pipe installation kit) |
| Electrical Rating: | 120 Volts AC, 60 Hz Ignition - 120W Burning - 98W |
| Fuel Type: | ASTM D3699 K1 KEROSENE ASTM D396 NO.1 LOW SULFUR FUEL OIL ASTM D975 ULTRA LOW SULFUR DEISEL (ULSD) ASTM D396 No.2 FUEL OIL (HOME HEATING OIL) |
| Required Accessories: | Flue Pipe Installation Kit or 5-inch Chimney Adapter Kit Fuel Filter and Drain Valve |
| Safety Device: | High Limit Thermistor, Heat Exchanger Bi-metal Switch, Temperature Fuse, Fusible Link Valve Exhaust Air Temperature: less than 500°F Temp & Pressure Relief Valve (included) |
| Nozzle Size: | 0.85 GPH |
| Spraying Angle: | 60° |
| Spray Pattern: | Delavan Type XA |
| Temperature Fuse: | 282°F |
| Electric Current Fuse: | 5 A (Main Control) 7 A (Auxiliary Port for Circulation Pump., etc.) |
| Optional Accessories: | Remote Controller |
